Porcelain tile
Hardwood
Engineered hardwood
Luxury vinyl plank
Laminate
Carpet
Shaw
Mohawk
COREtec
PergoFree in-home measure and written estimate: Shaw, Mohawk, COREtec and Pergo lines compared on your own rooms, with carpet, tile, vinyl plank, laminate and hardwood laid out side by side
Get your free estimateTrusted Tile Flooring Installation for Enterprise Homeowners
Tile is the floor most Enterprise homeowners regret getting wrong, because the failure rarely shows up on day one. It shows up months later as hollow-sounding corners, cracked grout lines, or a tile that rocks underfoot because the slab beneath it wasn’t flat or clean when the thin-set went down. Tile work in Enterprise has no forgiveness built in: the surface preparation, the layout, and the movement joints all have to be right before the first tile is set. Our technicians have up to 9 years of experience installing and setting tile, and we work with proven lines like Daltile and Shaw so the material matches the craft. Call (844) 560-4386 to set up a free estimate. We answer 24/7.
What Our Tile Flooring Installation Service Includes
Every tile job we take on covers the full scope, from tear-out through grout and cleanup. Here’s what each piece of the work involves, and when it’s the right call for your home.
Porcelain Tile Installation
Porcelain tile is a dense, low-absorption tile that holds up well in the traffic zones of an Enterprise home, from entryways to kitchens to hallways. You need it when you want a floor that handles daily wear and moisture without needing special care, or when you’re replacing a worn surface with something more permanent. We install porcelain over properly prepared substrates, set it with the correct thin-set for the tile and the slab, and finish the grout lines clean and consistent.

Bathroom Floor Tile Installation
Bathroom floors are the hardest working tile surface in the house because they combine water, foot traffic, and tight spaces that demand precise cuts. You need this when a bathroom floor is dated, cracked, or was set without the slope and waterproofing detailing a wet room requires. We handle the tear-out, prep the subfloor, and lay the tile so the room drains, cleans easily, and lines up with the fixtures and door swing rather than fighting them.

Large Format Tile Installation
Large format tile covers more area per piece, which means fewer grout lines and a cleaner, more open look in a big room. It also means a heavier tile, less tolerance for a wavy floor, and cuts that require proper tools and technique, which is why many general installers decline the work. We install large format tile with the flatness and coverage it needs, and we plan the layout so the cuts land where they look intentional rather than wherever the piece happened to end.

Ceramic Tile Floor Installation
Ceramic tile is the familiar, versatile option for kitchens, laundry rooms, and casual living spaces, and it comes in a wide range of looks and sizes. You need it when you want a durable tile floor at a sensible material cost, or when you’re matching a floor to tile that’s already in an adjoining room. We lay ceramic with attention to spacing, level, and grout color so the finished floor reads as one continuous surface.
Tile Removal
Old tile has to come out before new tile goes down, and removal is a job in itself: dust control, protecting the surrounding rooms, and getting the old thin-set off the substrate without gouging it. You need tile removal when the existing floor is cracked, hollow, or set over a surface that won’t support a new layer. We take out the old tile and grind the substrate clean so the new installation starts from a sound base instead of stacking a fresh floor on a failing one.
Tile Regrouting
Sometimes the tile is fine and only the grout has given out, which shows up as crumbling lines, dark staining that won’t scrub out, or grout that’s shrunk away from the tile edges. Regrouting is the right call when the tile itself is still bonded and level, because it restores the look and seals the joints without the cost and disruption of a full replacement. We remove the failing grout, clean the joints, and re-grout so the floor looks refreshed and the lines hold up.
Styles & brands we work with
- Hardwood
- Engineered hardwood
- Luxury vinyl plank
- Laminate
- Porcelain tile
- Carpet
- Shaw
- Mohawk
- COREtec
- Pergo
Brands We Service for Tile Flooring Installation
We install and service tile from Daltile, a professional-grade line that’s not commonly available through general handymen, and the difference shows in the consistency of the tile and the technical demands of the larger formats. Daltile’s product range means we can match a floor to the style of the room, and our familiarity with the line means we know how it cuts, sets, and grouts for a clean result. We also work with Shaw on tile and flooring projects across the home, and with Mohawk when a homeowner wants to coordinate tile with other flooring in the same renovation.
Karndean and COREtec come up often when a homeowner is weighing tile against a premium luxury vinyl option for a room where moisture is a concern, and we install all three so you can compare honestly rather than being steered toward whatever a single contractor happens to carry. Whether your project involves Daltile, Shaw, Mohawk, or another make, we can help you get it installed correctly. From carpet to tile to hardwood, one call covers the whole project.
Signs You Need Tile Flooring Installation Right Now
- Hollow or loose-sounding tiles. Tap across the floor and listen for a dull, hollow thud instead of a solid click. That sound usually means the tile has separated from the thin-set, and a loose tile will eventually crack or lift at the corner.
- Cracked tiles that keep spreading. A hairline crack can be cosmetic, but cracks that run from corner to corner or appear in a line across several tiles usually point to movement or a substrate problem underneath. Installing new tile over that without fixing the cause just buys you the same crack again.
- Grout that crumbles or pulls away. When grout turns to powder or shrinks back from the tile edges, moisture is getting into the joints. Left alone, that moisture works its way under the tile and loosens the bond.
- Lipped edges and uneven tiles. If one tile sits higher than its neighbor, you’ll feel it underfoot and catch it with a mop. Lipping is a sign the substrate wasn’t flat enough at installation, and it’s a tripping edge in a busy hallway.
- A floor that’s dated or doesn’t fit the room. Worn, outdated tile doesn’t have to be lived with. If you’re renovating a kitchen or bath, replacing the floor while the room is already torn up saves the cost and mess of doing it later.
Our Tile Flooring Installation Process – Step by Step
- 1
Free in-home measure and estimate. We come out, measure the rooms, look at the existing floor, and check the substrate for flatness and soundness. You get a written estimate with the material and labor broken out, and the written estimate sets the final price.
- 2
Material selection and layout planning. We help you choose from the brands we work with, then plan the tile layout before anything is cut. That means deciding where the full tiles land, where the cuts fall, and how the pattern meets doorways and cabinets.
- 3
Removal and substrate preparation. Old flooring comes out, and the substrate gets ground clean, leveled where needed, and checked before the first tile is set. This is the step most failed tile jobs skip, and it’s the one that decides how the floor holds up.
- 4
Tile setting and grouting. Tile goes down with full coverage and consistent spacing, and the grout goes in after the thin-set has set. We keep the grout lines uniform and the surface flat so the finished floor feels solid underfoot.
- 5
Final walkthrough and cleanup. We walk the finished floor with you, check the edges and transitions, and clean up the work area. Any questions about care and cleaning get answered before we leave.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Tile Flooring Installation Cost in Enterprise?
Tile flooring installation in Enterprise typically runs $3,000 – $9,000 for a 500 to 800 square foot project, installed, and tile starts at about $7 per square foot depending on the product. A bathroom floor tile installation in Enterprise usually lands at the lower end of that range, while a large format tile installation across an open living area runs higher because of the material cost and the precision the larger pieces demand. Tile removal adds to the job when the old floor has to come out and the substrate ground clean. Regrouting is the smallest line item of the group because it works with the tile you already have.
What moves the price: the tile you choose, the size of the room, whether the substrate needs leveling, and how many cuts the layout requires around cabinets, doorways, and fixtures. You avoid overpaying by getting the scope in writing, confirming whether removal and disposal are included, and asking what happens if the substrate turns out to be uneven. Our free estimate covers the measure, the material options, and a written price, so you’re comparing full jobs rather than square-foot guesses. Call (844) 560-4386 to schedule yours.
Tile Flooring Installation Near Enterprise – Our Service Area
We serve homeowners across Enterprise and the surrounding valley, including Paradise, Winchester, Henderson, Spring Valley, Summerlin, and Las Vegas. Whether you’re in a newer build in the southwest or an older home closer in, the estimate visit is scheduled around your availability and the work is booked once you’ve approved the written price. If you’re comparing options, our tile flooring installation page covers the neighboring area, and the main Flooring Installation Enterprise page lays out the full range of flooring we install. For carpet or wood, we also handle tile flooring installation projects alongside those trades so a whole-home job stays with one contractor.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Tile Flooring Installation in Enterprise
Tile flooring installation is the process of preparing the substrate, setting tile in thin-set, and grouting the joints to create a finished hard floor. It covers removal of the old surface, leveling and cleaning the base, planning the layout, cutting and setting the tile, and finishing the grout. We handle every step, from tear-out to the final walkthrough, so you’re not coordinating a demolition crew and an installer separately.
Most tile projects take a matter of days, not weeks, but the exact schedule depends on the square footage, the tile size, and whether the old floor has to come out first. The thin-set and grout need time to set, so a single room and a whole main floor won’t run on the same timeline. We set the install day and the expected duration at the estimate, once we’ve seen the space and the substrate.
The typical installed range in Enterprise is $3,000 – $9,000 for a 500 to 800 square foot project, with tile starting from about $7 per square foot. Bathroom floors generally fall toward the low end, and large format tile in a big open room runs higher. The written estimate sets the final price after we’ve measured and checked the substrate. Call (844) 560-4386 for an exact quote; estimates are free.
Yes. We install Daltile, Shaw, Mohawk, and other lines, and we work with the tile you choose. Our experience with Daltile matters most on large format and specialty tile, where the material demands proper tools and technique and box-store installers often decline the job. If you already have tile picked out, bring it to the estimate and we’ll tell you what the installation involves.
We don’t promise same-day tile installation, because tile is a scheduled job that starts with a free in-home measure and a written estimate, then books an install day. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Closed Saturday.
Warranty terms depend on the product and the manufacturer, so we won’t quote a term we haven’t confirmed for your specific tile. The product instructions and the written estimate set what applies to your job. Ask at the estimate and we’ll walk you through what the material carries and what our installation covers.
Clear the room of furniture and breakables, and plan to keep pets and foot traffic off the work area during the set and grout stages. If the old floor is coming out, take up anything fragile from adjoining rooms and expect some dust despite our containment. We’ll tell you exactly what to move and what to leave at the estimate visit, so nothing catches you off guard on install day.
Schedule Your Tile Flooring Installation Service in Enterprise Today
Tile done right starts with a proper measure and a written price, and that’s what you get from us at no cost. Call (844) 560-4386 to book your free in-home estimate for tile flooring installation in Enterprise. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We’ll measure the room, talk through your options, and put the scope in writing. No obligation. The written estimate sets the final price.
Written by the team at Flooring Installation Enterprise.