Hardwood
Engineered hardwood
Luxury vinyl plank
Laminate
Porcelain tile
Carpet
Shaw
Mohawk
COREtec
PergoFree in-home measure and written estimate: Shaw, Mohawk, COREtec and Pergo lines compared on your own rooms, with carpet, tile, vinyl plank, laminate and hardwood laid out side by side
Get your free estimateTrusted Hardwood Floor Refinishing for Enterprise Homeowners
Hardwood floors in Enterprise take a beating. Desert air keeps indoor humidity low for much of the year, and that steady dryness pulls moisture out of the wood. Boards shrink slightly, gaps open at the seams, and the finish on top starts to crack along the grain and look dull in the traffic lanes. Refinishing solves that by taking the worn surface down to clean wood and building a fresh finish back up, so you keep the floor you already have instead of paying to tear it out. Our technicians have up to 9 years of experience sanding, staining, and recoating hardwood, and we handle the whole job from the first walkthrough to the final coat. If your floors have gone gray, scratched, or tired, don’t replace them. Call (844) 560-4386 and we’ll set up a free estimate. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
What Our Hardwood Floor Refinishing Service Includes
Refinishing isn’t one job, it’s a set of jobs that get matched to the condition of your floor. Some homes need the full treatment; others only need a light pass to bring the shine back. Here’s what each part involves and when it makes sense.
Hardwood Floor Sanding
Sanding removes the old finish and a thin layer of the wood surface to expose fresh, clean timber underneath. You need it when the finish is worn through, when there are deep scratches and dents, or when an old stain has gone patchy and uneven. We use drum and orbital sanders sized to the room, work through progressively finer grits, and keep dust controlled with HEPA extraction so the rest of the house stays livable. How far we can sand depends on the thickness of the wear layer, and we check that at the estimate before anyone touches a machine.

Hardwood Floor Staining
Staining sets the color of the floor, from a pale natural tone to a deep walnut. It’s the step you want when you’re changing the look of a room, matching new wood to old, or covering the blotchy patches left by sun exposure. We test the stain on a sample area of your actual floor first, because species and grain take color differently, and we let you see it before we commit. From there we apply it evenly and seal it so the color holds.

Hardwood Floor Restoration
Restoration goes further than a simple refinish when a floor has real damage: water stains, pet marks, burns, cupped or loose boards, or sections that have been patched badly over the years. You need it when the floor looks like it might be past saving, before you decide to rip it out. We assess the boards, replace what can’t be saved with matching wood, and bring the whole floor back to a consistent surface. In a lot of Enterprise homes, restoration costs a fraction of a new floor and keeps the original character of the house.

Hardwood Floor Buffing
Buffing is a light abrasion that scuffs up the top coat so a new finish will bond, without cutting into the wood itself. It’s the right call when the finish is scratched and dull but the wood underneath is still sound. We screen the surface, clean it thoroughly, and apply a fresh coat to bring the sheen back. It’s the least invasive option and the quickest way to freshen a floor that’s only lightly worn.
Screen and Recoat Hardwood Floors
Screen and recoat is the maintenance step between full sandings. You screen the existing finish lightly, then apply one or two new coats on top, so the floor gets a fresh wear layer without losing any wood thickness. It works well for floors that are structurally fine but have lost their shine in high-traffic areas like hallways and kitchen edges. If your floor has never been sanded down and still has good finish underneath, this is often all it needs.
Stair Refinishing
Stairs are the part of a hardwood job most people forget about until the upstairs looks brand new and the staircase doesn’t match. We sand and refinish treads and risers to match the floor, and we work around the balusters and nosings that make stairs tricky. If your stairs creak or have loose treads, we can address those at the same time. It’s worth doing the stairs in the same visit as the floors so the color and sheen line up.
Styles & brands we work with
- Hardwood
- Engineered hardwood
- Luxury vinyl plank
- Laminate
- Porcelain tile
- Carpet
- Shaw
- Mohawk
- COREtec
- Pergo
Brands We Work With for Hardwood Floor Refinishing
We install and refinish floors across a range of name-brand products, and that range matters when you’re matching a refinish to a floor that’s already down. Shaw and Mohawk both make engineered and solid hardwood lines that homeowners in this area choose often, and we know how those floors sand and take a stain. Karndean and COREtec sit on the luxury vinyl side of our work, and while they aren’t hardwood, matching a refinish to flooring in an adjoining room is something we do all the time. The point is that we work with the floor you’ve got, not just the one we’d like to sell you.
When we refinish an existing floor, the brand matters less than the wood species, the wear layer thickness, and how the floor has been treated over the years. We evaluate all three at the estimate. Whether you have Shaw, Mohawk, or any other make underfoot, we can help you decide between a full sand-down, a screen and recoat, or a restoration that saves the boards you already have. If you’re also considering new flooring in another room, we install carpet and tile too, so one call can cover the whole project.
Signs You Need Hardwood Floor Refinishing Right Now
- Dull, gray patches in traffic lanes. When the finish wears thin in the paths people walk most, the wood underneath loses its protection and starts to gray out. That graying is the wood itself drying and oxidizing, and it gets harder to reverse the longer you wait.
- Scratches you can feel with a fingernail. Light surface scuffs are cosmetic, but if you can catch a scratch with your nail, it’s through the finish and into the wood. Those need sanding, not just a coat on top.
- Gaps opening between boards. Some seasonal movement is normal in a dry desert climate, but widening gaps let dirt and moisture into the seams. Refinishing after the boards settle can close the visual gap and seal the floor again.
- Water rings, pet stains, or dark spots. These are signs moisture has gotten into the wood. A restoration can often sand past minor stains, and it’s worth checking before you assume the floor is ruined.
- Finish peeling or flaking near edges. When the top coat lifts, it’s usually a sign of age or a previous coat applied over a dirty surface. A screen and recoat can fix it if caught early; left alone, the wood beneath starts to take damage.
Our Hardwood Floor Refinishing Process – Step by Step
- 1
Free in-home estimate and floor assessment. We walk the floor with you, check the wear layer thickness, look for cupping or loose boards, and test how the existing finish is holding. You get a written price before any work is booked, and we tell you honestly if a full sand-down is overkill.
- 2
Furniture clearing and dust protection. We mask off doorways, seal vents, and set up HEPA extraction on the sanders. You’ll still want to move small items yourself, but we’ll tell you exactly what needs to be out of the way before we start.
- 3
Sanding through the grits. We work from coarse to fine, leveling the floor and removing the old finish. On stairs and edges we switch to hand and edge sanders so the detail work matches the field of the floor.
- 4
Stain and finish application. We apply the stain you chose after seeing it on a sample, then build up the finish coats. Between coats we screen lightly and clean thoroughly so the final surface is smooth and even.
- 5
Final walkthrough and cure guidance. We walk the finished floor with you, point out anything worth noting, and tell you how to care for it going forward. Curing time depends on the finish product and the conditions in your home, and we’ll give you the specifics for your job.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Hardwood Floor Refinishing Cost in Enterprise?
A typical hardwood floor refinishing project in Enterprise runs $1,800 to $5,000 for a 500 to 800 square foot job, installed. That’s the estimated range for sanding, staining, and finishing an existing floor, and it’s usually well below the cost of tearing out and replacing the wood. A screen and recoat on a floor in decent shape comes in at the lower end, while a full restoration with board replacement and stair refinishing lands nearer the top.
What moves the number: the square footage, the condition of the floor, how much repair is needed before sanding, the number of stairs involved, and whether you choose a simple clear finish or a multi-step stain. Refinishing starts from about $3 per square foot, and the exact rate depends on the product, the room layout, and the subfloor condition. Keeping furniture out of the way, choosing a single stain for the whole floor, and combining the stairs into the same visit all help keep the job in range.
We don’t quote over the phone and then surprise you on the day. The written estimate sets the final price, it’s free, and it includes the sanding, staining, and finish work for the areas we’ve measured. If something changes once we open up the floor, we stop and talk to you before doing anything that changes the price.
Hardwood Floor Refinishing Near Enterprise – Our Service Area
We work throughout Enterprise and the surrounding valley. That includes Paradise and Winchester just up the road, plus Henderson, Whitney, Sunrise Manor, North Las Vegas, Spring Valley, Summerlin, Las Vegas, Boulder City, and Sandy Valley. Because we cover the whole metro, we can usually fit a free estimate into the same week you call, and we’ll confirm timing when you book. Take a look at the areas we cover through Enterprise and Paradise if you’re nearby and want to know how the neighborhoods connect to our service area.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Hardwood Floor Refinishing in Enterprise
Hardwood floor refinishing is the process of sanding off the old, worn finish and applying a new one, without replacing the floor itself. It restores the color and sheen of the wood and gives it a fresh protective layer. Depending on the condition, it can range from a light screen and recoat to a full sand-down and stain. It’s the cost-effective alternative to pulling out a solid floor that still has life in it.
Most refinishing jobs take a few days from start to finish, though the exact schedule depends on the square footage, the number of coats, and how the finish cures in your home. We set the timeline at the estimate so you know what to plan for. Staining and multiple finish coats add time compared with a simple screen and recoat. We’ll give you the specific schedule for your job in writing before we book it.
Typical estimated pricing runs $1,800 to $5,000 for a 500 to 800 square foot project, and it depends on square footage, floor condition, and the finish you choose. Per-square-foot pricing starts at about $3, but the room layout and subfloor condition can change that. The written estimate sets the final price, and the estimate itself is free. Call (844) 560-4386 for an exact quote.
Yes. We refinish and service Shaw and Mohawk hardwood floors, along with other makes, and we know how those products sand and take a stain. The brand is only part of the picture, though. The wood species, the wear layer, and the condition of the floor determine what’s possible. We’ll assess all of it at the free estimate.
We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed Saturday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Refinishing is a scheduled job, so the first step is always a free estimate, and we’ll book your install day once the price is agreed.
Warranty terms depend on the finish product and the scope of your job, and we don’t promise one size fits all. We’ll spell out the coverage in writing with your estimate so you know exactly what’s covered. If you have questions about a specific finish or product, ask at the estimate and we’ll walk you through it. Call (844) 560-4386 to talk it through.
Clear small furniture and personal items from the rooms being refinished, and plan to stay off the floor while the finish cures. We’ll mask doorways and seal vents, but the more you clear beforehand, the smoother the job goes. We’ll tell you the specific cure time for your finish at the walkthrough. And if you’re also planning new carpet or tile elsewhere, we can coordinate both visits through Flooring Installation Enterprise.
Schedule Your Hardwood Floor Refinishing Service in Enterprise Today
If your hardwood floors have gone dull, scratched, or tired, refinishing is the smart move. We’ll assess the floor, test a stain on your actual wood, and give you a written price with no obligation. Call (844) 560-4386 to schedule your free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We also work with Winchester homeowners on the same kind of floor, so if you’re nearby, we can fit you in.
Written by the team at Flooring Installation Enterprise.